DHT Products > Heating & Cooling Coils > Condenser Coils

Condenser Coils, Refrigerator Coils & Air Conditioner Coils

OEM and Replacement Coils for Every Application
Cross Reference All Major Brands
Quick Response/Field Measurement Available
Competitive Prices
Fast Turnaround
48 Hour and 5 Day Ship Available
Standard Lead Time is 2-3 Weeks
Credit Cards Accepted

Replacement condenser coils for all types of Refrigerants.

Primary Surface

Round seamless copper tubes are mechanically expanded into the fin collars of the secondary surface. The mechanical expansion provides a permanent metal-to-metal bond for efficient heat transfer. Tubes are staggered in the direction of airflow

Headers

Seamless copper with die-formed holes that provide a parallel surface to the coil tube for strong brazing joints.

Connections

Copper O.D. sweat with standard arrangement for one compressor circuit. FACE SPLIT circuiting available for two or more compressors.

Casing

Using 16-gauge minimum thickness material, 1 1/2" flanges are die-formed to permit easy stacking and mounting. Intermediate tube supports are supplied on coils over a certain height and length

Casing Material Options:

Full 16 gauge galvanized steel standard with optional stainless, aluminum and copper.

Testing & Performance

All coil assemblies are leak tested under water at 500 PSIG air. All coil assemblies Nitrogen charged for shipping.

PERFORMANCE IS CERTIFIED under ARI Standard 410.

Tube Size Options:

5/8" O.D. x .020" wall thickness standard with optional wall thickness of (.025) (.035) and (.049). Centerlines are 1.5" in the tube face and 1.299" between rows.
1/2" O.D. x .017" wall thickness standard with optional wall thickness of (.025). Centerlines are 1.25" in the tube face and 1.083" between rows.
3/8" O.D. x .014" wall thickness standard with optional wall thickness up to (.035). Centerlines are 1" in the tube face and .866" between rows.
NOTE: 1/4" and 5/16" tubes available.
Rows available are 1, 2, 3, 4, 5, 6, 8, 10 and 12.

We have over 20 different surfaces available. Please contact us if construction other than what is above is needed.

Secondary Surface

Corrugated, louvred and sine wave plate type fin that is die-formed. Fin collars are full-drawn to provide accurate control of fin spacing and maximum contact with tubes.

Fin Material Options:

5/8" tubes comes standard with aluminum fin .008" thick with optional (.010). Optional copper fin thicknesses available are (.006) (.008) and (.010). Fins per inch available 6 through 14.
1/2" tubes come standard with aluminum fin .006" thick with optional copper fin (.006). fins per inch available 6 through 14.
3/8" tubes comes standard with aluminum fin .0045" to .010” thick with optional thicknesses available. Copper fin thicknesses available start at .006".
Fins per inch available 6 through 20.

Contact us for availability of other patterns, fin materials, and/or thicknesses.